This Kit Includes: A stainless steel constant diameter cat-back Monster Exhaust with a 3.0" Intermediate pipe and a 3.5" tailpipe. A polished stainless steel, low restriction Monster Muffler. As well as a 5" Polished stainless steel double wall rolled edge tailpipe tip. The kit is an easy bolt on design and comes with a Lifetime Ltd. Warranty. The muffler utilizes spun ceramic, very high temperature packing and produces a rich, throaty sound. Significantly reduces exhaust back pressure.

Stinger System

Includes: Banks Ram-Air intake with Hi-Rise filter Housing, lifetime filter and service hit.  Stainless low restriction, acoustic-tuned Dynaflow muffler with integral heat shielding.  Stainless constant-diameter Monster exhaust and 3 ½” tailpipe.  4” polished-steel tailpipe tip.  Comprehensive Owner’s Installation Manual.

Gains up to: +29 horsepower  +45 lb-ft torque  +4% fuel economy

PowerPack System

Includes: Banks Ram-Air intake with Hi-Rise air-filter housing, lifetime filter and service kit.  Stainless TorqueTube exhaust manifolds with heat shielding.  Stainless streamlined Y-collector assembly.  Stainless low-restriction, acoustic-tuned Dynaflow muffler with integral heat shielding.  Stainless constant-diameter Monster exhaust and 3 ½” tailpipe.  4” polished-steel tailpipe tip.  Comprehensive Owner’s Installation Manual.

Gains up to: +49 horsepower  +68 lb-ft torque  +8% fuel economy

This fully automatic power and load sensing computer electronically converts the Ford E4OD/4R100 transmission into a heavy-duty unit. The E4OD/4R100, in full size Ford trucks and vans since 1989, has smooth, car-like shift characteristics. However, many truck owners would prefer firmer shifts especially when hauling large loads.

TransCommand is the quick, efficient cure. The electronic module simulates a heavy load, directing the transmission to raise the hydraulic pressure accordingly. Light throttle shifts are still smooth but firm, while full-throttle or heavy load driving produces solid shifts that are right there. Excessive clutch slippage is eliminated, greatly extending transmission life.

Installation is easy, taking about one hour with basic hand tools. No modifications to the transmission are required. Banks TransCommand is built with high temperature, solid state components and comes with all necessary brackets and hardware. Strongly recommended for all E4OD/4R100 Transmissions. Required with sidewinder turbo.